SMT plug-in device Stencil Printer PCB Screen Printing Dispenser Machine Solder Paste Machinery PCBA Coating Solar Panel Assembly Production Line Reflow Oven Inspection
JM-Series Automation Insertion process through reliable quality
| 1500x1500x1450 |
1500x1657x1550 |
1500x1892x1550 |
FEATURE 1: Laser recognition ensures accurate insertion of components
Use the laser to identify the very front end of the component pins to achieve accurate insertion
Take side photos of the components that rotate 360 degrees within the laser sensor. Based on the image edge and rotation Angle of the component, the set of tangents relative to the component is obtained
Image recognition
By applying JUKI's unique 3D image recognition technology, the front-end part of the pins can be identified more accurately. The pointed front end, semi-circular front end, and pin reading recognition with height differences have also become possible, achieving high-precision insertion of a wide range of inserted components.
FEATURE 2: High-speed insertion
JM-100
Image recognition
The newly developed bent foot device. Variable spacing, internal bending, external bending
All N bends can be corresponding. Prevent the floating and falling of components.
Corner bending device
FEATURE 6: System Connection
At the beginning of production, when components are used up during production, it can prevent incorrect installation of components when replacing them. In addition, the serial number of the circuit board carrying the component can be traced from the batch number of the component to achieve high-quality production.
FEATURE 7: Abundant Supply devices (Options)
The component insertion speed is 0.6 seconds for each component to be attached to the suction nozzle and 0.8 seconds for the suction nozzle to be clamped. Compared with previous models, the speed has been significantly improved. Achieve the best and highest beat.
Then, draw the shape of the component and calculate the center, Angle and width of the component relative to the rotation center of the suction nozzle. It can recognize 0603 to 50mm
Audited Supplier 
){kind=link}